To pair your modern controller with your Atari VCS via Bluetooth:
1. Power on your Atari VCS.
2. Wait for the Atari logo animation to finish playing.
3. You will see a flashing blue icon on the screen to indicate that
the VCS is seeking a connection...
The Atari VCS Wireless Modern Controller is designed to work with the
Atari VCS but is also compatible with most PCs, mobile devices, and
The Atari VCS Modern Controller can also emulate an Xbox One
controller. To enter the PC Mode press ...
The modern controller has a light behind the Atari Fuji logo button in
the top right, as well as (4) four LED lights directly below the Atari
Fuji logo button. The behavior of the lights has specific meaning.
The Atari Fuji logo button in the center of ...
To charge the controller, connect your Atari VCS Wireless Modern
Controller to the Atari VCS using the USB Play/Charge cable. Plug the
male mini-USB connector into the controller, and plug the male USB
connector into any available USB port on the Atari VC...
Q1. My Wireless Modern Controller is not pairing.
A1. Confirm that the controller is charged by pressing the Atari Fuji
logo button, if the button does not glow, you must charge the battery
using the USB Play/Charge cable.
A2. Confirm you are followin...
The VCS Dashboard currently supports a maximum of four (4) controllers
(either via Bluetooth or USB). You can use any combination of
Bluetooth and wired connections, but only 4 will be active at any
time. The underlying hardware can support more than 4 co...